 DONKIN & Co.
Ships Steering Engine
A very nice original twin cylinder steering engine
No.5288 by Donkin & Co, Newcastle-on-Tyne.
Cylinders approx 4" x 5".
In very nice original condition.
SOLD
(Photo shows engine since restored.) |
|
 A.G. MUMFORD
Single Cylinder
Circulating Pump Engine
Single Cylinder Engine 2" x 3 1/2" Stroke.
Approx 25" high.
In good condition. |
|
 A.G. MUMFORD
Single Cylinder
Circulating Pump
Single Cylinder Engine 2" x 3 1/2" Stroke.
Complete with a bronze centrifugal pump.
In good condition. |
|
 ELLIOTT & GAROOD
Capstan Steam Engine
Twin cylinder horizontal mounting.
Cylinders 2 1/2" x 5".
Approx 34" High.
3/8" BSP steam inlet.
Designed for fishing net handling equipment.
In good condition. |
|
 ELLIOTT & GAROOD
Horizontal Steam Winch
Believed to be from a steam 'drifter'.
Single cylinder horizontal mounting.
Cylinder 2" x 4".
Approx 30" Long.
In good restored condition. |
|
 J. TINSLEY
Steam Winch
Twin cylinder, horizontal mounting.
With link reversing gear.
By J. Tinsley Ltd, Darlington.
Cylinders 3 1/2" x 7" Stroke.
Wt est 300 Kg.
In good condition.
SOLD |
|
 CLARKE CHAPMAN
Windlass (Derrick) Steam Winch
Twin cylinder horizontal mounting.
~Built c1900 ~
Cylinders 5" x 10" Stroke.
With link reversing gear.
Wt est 250 Kg.
In reasonable, original condition.
SOLD |
|
 REID & Co.
Capstan Steam Winch
Twin cylinder horizontal mounting.
~ Built c1890 ~
Duplex engine drives shaft thro' gearing.
2 warping drums.
Wt est 250 Kg.
Ex a large steam yacht, in fully restored condition.
SOLD |
|
 Horizontal Winch
Designed for electric drive.
With reversing gear.
Approx 3 Ft Long x 3 Ft Wide.
In unrestored condition. |
|
 DRYSDALE
Circulating (Condenser) Vertical Pump Engine
~ Built c1930 ~
Cylinder 3" x 4" approx.
Piston valve.
Wt 50 Kg.
In unrestored condition. |
|
DRYSDALE
Circulating Vertical Pump Engine
~ Built c1930 ~
Cylinder 2.5" x 3.5"
Piston valve.
Wt est 40 - 50 Kg.
In unrestored condition. |
|
Condenser Air Pump
Vertical, rotative, steam driven pump.
Approx 1,000 - 1,500 lbs\hr.
66" High. Wt 350 Kg. c1950.
Fully restored to exhibition standard.
SOLD |
|
Thrust Block & Intermediate Shaft
For a Plenty triple expansion engine. |
|
Anchor Windlass
Twin Cylinder Reversible Engine
Horizontal mounting with gear reduction
to 2 gipsies and 2 warping drums. Wt est 400 Kg.
Complete, but unrestored.
SOLD |
|
DONKIN & Co.
Wheelhouse Steering Engine
~ Built c1952 ~
Twin cylinder vertical.
Wt est 350 Kg.
Complete, but unrestored.
SOLD |
|
|
|
