~ Horizontal Engines ~
 Single Cylinder Horizontal
Workshop Engine
2 1/2" x 5" Cylinder
Fylwheel 16" Dia ~ 32" Long.
In good, restored condition. |
|
 Single Cylinder Horizontal
Workshop Engine
Fitted with Meyer expansion slide valve gear.
3" x 5" Cylinder
Fylwheel 12" Dia ~ 32" Long.
In good, restored condition. |
|
 BOWLER
Single Cylinder Workshop Engine
~ Built in Bath c1890 ~
2" x 5" Cylinder ~ Fylwheel 16" Dia. Wt 50 Kg.
Orginally drove a soft drinks carbonating plant.
In restored condition, with attached feed pump.
SOLD |
|
 Single Cylinder Horizontal
4 1/2" x 8" Cylinder. Flywheel 36" Dia.
Approx 3 H.P. with governor.
Base 43" Long, 67" Overall.
In reasonable unrestored condition.
SOLD |
|
 CRETORS
"Popcorn Engine"
Single Cylinder Horizontal
Serial No.7525 ~ Made in USA c1900.
Cylinder 1 1/2" x 3".
Base 17 1/2" x 8 1/2".
In good condition. |
|
 DUJARDIN
Single Cylinder 330 H.P. Steam Engine
~ Built in France in 1922 ~
Complete with new boiler and condensing system.
Currenlty dismantled.
In reasonable, unrestored condition.
SOLD |
|
 ELLIOTT & GAROOD
Capstan Steam Engine
Twin cylinder horizontal mounting.
Cylinders 2 1/2" x 5".
Approx 34" High.
3/8" BSP steam inlet.
Designed for fishing net handling equipment.
In good condition. |
|
 ELLIOTT & GAROOD
Horizontal Steam Winch
Believed to be from a steam 'drifter'.
Single cylinder horizontal mounting.
Cylinder 2" x 4".
Approx 30" Long.
In good, restored condition. |
|
 EDWIN FODEN
Single Cylinder Horizontal Mill Engine
~ Built in Sandbach c1880 ~
5" x 10" Cylinder (approx). Wt est 200 Kg.
Believed to be the smallest & earliest
engine made by Foden in existence.
In unrestored condition. |
|
 GREENS & Co.
Single Cylinder Horizontal
~ Built in London c1900 ~
3" x 6" Cylinder (approx).
18" Dia Fylwheel ~ Wt approx 150 Kg.
Complete and fully restored.
SOLD |
|
 GREENS & Co.
Single Cylinder Horizontal
~ Built in London c1900 ~
3" x 6" Cylinder (approx).
18" Dia Fylwheel ~ Wt approx 150 Kg.
In good restored condition, with Pickering governor. |
|
 CARL HOLMBERG
Single Cylinder Horizontal
~ Thought to be made in Sweden, c1900? ~
Approx 4" x 7" Cylinder. Wt est 200 Kg.
34" Wide x 5 ft 4" Long ~ Flywheel 36" Dia.
In unrestored condition.
(Photo shows engine with flywheel removed.) |
|
 W.E. HOLMES
Single Cylinder Horizontal
~ Built in Huddersfield c1900 ~
Approx 5" x 10" Cylinder. Wt est 1000 Kg.
34" Wide x 5 ft 4" Long ~ Flywheel 36" Dia.
Complete and fully restored.
SOLD |
|
 E.S. HINDLEY
Single Cylinder Horizontal
~ Built By Hindley of Bourton, Dorset c1900 ~
Approx 3 1/2" x 6" Cylinder. Wt est 250 Kg.
Approx 3 ft Long ~ Flywheel 30" Dia.
A very rare (the smallest?) Hindley engine.
Complete and in good condition. |
|
 LEFLAIVE & Cie.
Single Cylinder Horizontal
Mill Engine
Cylinder 12" x 18" Stroke.
An attractive French built engine of c1900.
Complete with a large and ornate governor.
In good original condition.
(Engine ist currently dismantled.) |
|
 F. PEARNS & Co.
Single Cylinder Horizontal
~ Built in Manchester c1900 ~
7" x 12 " Cylinder (approx).
7 ft 6" x 30" Overall ~ Bed 5 ft long.
Flywheel 4ft 6" Dia x 6".
Wt est 1 Tonne.
Complete but unrestored. |
|
 W. POPE
Single Cylinder Mill Engine
~ Built in Slough c1885 ~
10" x 26" Cylinder. Wt est 6-7 tonnes.
Bed length 12 ft (19 ft overall).
9 ft flywheel x 7 ft face.
Link reversing, with feed pump and governor.
Unrestored, but in reasonable condition.
SOLD |
|
 ROLLINSON
Single Cylinder Horizontal Mill Engine
~ Built c1885 ~
5" x 12" Cylinder (approx).
8 ft x 4 ft Overall ~ Flywheel 42" Dia.
Wt est 1 Tonne.
Complete and fully restored.
SOLD |
|
 TANGYE & Co.
"SOHO" Type
Single Cylinder Horizontal
~ Built in Birmingham c1890 ~
3" x 6" Cylinder (approx). Wt est 350 Kg.
SOLD |
|
 TANGYE & Co.
"COLONIAL" Type
Single Cylinder Horizontal Workshop Engine
Tangye Engine No.519
Cylinder approx 7" x 12" Stroke.
Bedplate approx 6 Ft Long, 42" Dia Flywheel.
An attractive Tangye workshop type engine.
In good original condition (currently dismantled.) |
|
 TANGYE & Co.
Single Cylinder Horizontal Mill Engine
"SARA"
~ Built in Birmingham c1890 ~
8" x 20" Cylinder.
Flywheel 6 ft x 10" ~ Bed 9 ft Long.
Wt est 3-4 Tonnes ~ Overall 11 ft x 6 ft.
In unrestored condition. |
|
 TIDMAN
Single Cylinder Horizontal
Made by Tidmans of Norwich c1890.
3" x 4" Cylinder.
Flywheel 16" dia ~ Baseplate 28" x 10".
Wt approx 75 Kgs.
Complete with governor and feed pump.
In good condition. |
|
 Single Cylinder Horizontal
Workshop Engine
A high quality engine, maker unknown, c1890.
Drove a cobblers shop until 1970.
2" x 4 1/2" Cylinder (approx).
Wt approx 35 Kg.
Unrestored but in good, original condition. |
|
 Portable Horizontal Engine
Small, fractional H.P. single cylinder engine
and vertical fire-tube boiler, c1900.
In very good working condition.
With current boiler certificate.
Engine reputedly orginally used
by a Leeds based jewellers.
Wt approx 100 Kgs.
SOLD |
|
 Single Cylinder Horizontal
Maker unknown c1900.
Cylinder 2" x 4". Wt approx 25 KGs.
In good condition. |
|
 Single Cylinder Horizontal
(Maker unknown)
Cylinder 2" x 3" ~ Fylwheel 11 1/2" Dia.
Base 20" Long. Wt approx 25 KGs.
Complete with attached boiler feed pump.
In good condition. |
|
 Horizontal Cross-Compound
Workshop Engine
Unknown U.K. builder, c1880.
Cylinders 2" + 3" x 5" stroke.
On wooden frame with central flywheel 18" Dia.
3 Ft long x 20" wide. Wt approx 70 KGs.
In unrestored condition. |
|
 Twin Cylinder Horizontal
Duplex Cylinders Approx 2" x 3 1/2"
On heavy cast iron base with attached feed pump.
Base approx 23" long x 13" Wide.
Wt approx 75 KGs.
Constructed c1900.
In good original condition. |
|
 Twin Cylinder Horizontal
Duplex Cylinders Approx 2 1/2" x 4"
Unkown maker, c1900.
Mounted on base approx 42" long x 18" Wide.
Wt approx 100 KGs.
In good original condition. |
|
 Single Cylinder Horizontal
Single Cylinder Approx 2 1/2" x 4"
Complete with vertical fire tube steam boiler.
Boiler approx 20" High x 9" Dia.
Mounted on base 32" long x 17" Wide.
Unkown maker, built to a high standard.
In good original condition.
SOLD |
|
 Twin Cylinder
Crane Engine
Twin Cylinders 6" x 14".
Wt approx 200 KGs.
Without crankshaft but in good, original condition. |
|
 Single Cylinder Horizontal
Workshop Engine
Cylinder 4" x 12".
Flywheel 43" Dia.
An attractive c1890 workshop engine.
Weight est 450 KGs.
In reasonable condition.
SOLD |
|
ROBEY
Drop Valve Tandem Compound Horizontal Mill Engine
Approx 80 HP ~ No.43337 ~ Built 1927
9 1/2" + 15 1/2" x 20" Cylinders with drop valves.
Flywheel 10 Ft Dia, Wt approx 8 tonnes.
In reasonable unrestored condition. |
|
 J. TINSLEY
Steam Winding Engine
Twin cylinder, horizontal mounting.
With link reversing gear.
By J. Tinsley Ltd, Darlington.
Cylinders 3 1/2" x 7" Stroke.
Wt est 250 Kg.
In good condition.
SOLD |
|
 Duplex Winch Engine
Twin cylinder, horizontal mounting.
Maker unknown (?) but of very high quality.
Cylinders 4" x 6" Stroke.
Bedplate 3 Ft 6" Long x 2 Ft 6".
Wt est 300 Kg.
In good, restored condition. |
|
~ Vertical Engines ~
 BEAM ENGINE
Single Column Beam Engine
Single Vertical Cylinder 3 1/2" x 7".
28" Dia Fylwheel.
Complete with governor.
Very well made and in excellent condition.
SOLD |
|
 Dairy Engine
Single Cylinder True Vertical
Over-crank workshop engine by unknown maker.
~ Built c1880 ~
Used as a dairy engine.
1 1/2" x 4" Cylinder ~ Flywheel 20" Dia.
Wt approx 50 Kg.
In good, original condition. |
|
 Single Cylinder Vertical
4 Column Workshop Engine
Genuine c1880 workshop engine.
Maker unknown.
Cylinder 2" x 3". 18" Dia Flywheel
Wt approx 25 Kg.
In unrestored condition. |
|
 W.H. COWARD
Single Cylinder
Inverted Vertical
A marine style engine built in Bath c1920.
Single front column & cast back standard.
Cylinder 6" x 9 ". Slide valve.
75" High plus Governor.
Flywheel 5 Ft Dia.
Wt approx 1000 Kg.
In unrestored condition. |
|
 TRUE VERTICAL
(Maker unknown)
~ Built c1880 ~
Cylinder 6" x 8" ~ Flywheel 36" Dia.
Wt approx 1000 Kg.
In good, original condition. |
|
 Twin Cylinder Vertical
Wall Engine
Duplex cylinders approx 3" x 5".
An early twin cylinder engine
made in Scotland c1860's.
Mounts vertically to the wall,
believed used to drive a barn thresher.
Dims: 40" x 32" Overall ~ Flywheel 14" Dia.
In reasonable, original condition. |
|
 DONEGAN & SWIFT
Single Cylinder Inverted Vertical
Workshop Engine
Built in the USA c1900
'Banjo' type frame.
3 1/2" 5 1/2" Cylinder.
Flywheel 18" Dia. 38" High. Wt 100 Kg.
In good unrestored condition. |
|
 EASTON & BESSEMER
Single Cylinder Inverted Vertical
An unusual high speed open crank
engine designed for dynamo drive.
Made in Taunton, Somerset.
Cylinder 5" x 9" ~ Flywheel 30" Dia.
Fully restored and in excellent condition.
SOLD |
|
 BOTTLE ENGINE
Single Cylinder Inverted Vertical
Workshop Engine
~ Built in USA c1900 ~
4" x 6" Cylinder. 49 " High. Wt Abt 200 Kg.
In good unrestored condition.
(Has been repainted.) |
|
 BOTTLE ENGINE
Single Cylinder Inverted Vertical
Workshop Engine
~ Built in USA c1900 ~
5" x 7" Cylinder. 52"" High. Flywheel 24"
Wt Abt 200 Kg.
In unrestored condition. |
|
 BOTTLE ENGINE
Single Cylinder Inverted Vertical
Workshop Engine
~ Built in USA c1900 ~
5" x 7" Cylinder. 50" High. Wt Abt 200 Kg.
In unrestored condition. |
|
 HERSCHELL-SPILLMAN
Carousel Steam Engine
By Herschell-Spillman of North Tonawanda.
An original steam centre engine from an
American built "carousel" or gallopers set.
Inverted twin 4" x 6" Cylinders with slide valves.
24" Dia Flywheel. 38" High Overall.
Mounted on a portable trolly.
In good, original condition. |
|
 E.S. HINDLEY
Single Cylinder Inverted Vertical
Workshop Engine
~ Built in Somerset c1900 ~
2" x 5" Cylinder. 22" Flywheel. Wt 75 Kg.
Complete with Hindley governors.
The smallest engine in the Hindley range.
Restored and in good condition. |
|
 E.S. HINDLEY
Single Cylinder Inverted Vertical
Workshop Engine
~ Built in Somerset c1900 ~
3" x 5" Cylinder. 22" Flywheel. Wt 100 Kg.
Complete with Hindley governors.
In good, restored condition. |
|
 LAWRENCE & Co.
Single Cylinder Inverted Vertical
Workshop Engine
~ U.S.A. Built, c1900 ~
Cylinder 3" x 5" (approx).
Cast "Bottle" type frame, with governor.
Wt est 100 Kg.
In good, restored condition. |
|
 MARSHALL
Single Cylinder Inverted Vertical
Built in Gainsborough, Lincolnshire c1900.
Cylinder 4 1/2" x 8" ~ Flywheel 32" Dia.
Approx 56" High.
In fully restored condition.
Minor painting and lagging required). |
|
 MARSHALL
Single Cylinder Inverted Vertical
Built in Gainsborough, Lincolnshire c1900.
Cylinder 4 1/2" x 8" ~ Flywheel 36" Dia.
Approx 56" high plus original cast iron bed extension.
Attached boiler feed pump.
In good unrestored condition. |
|
 MARSHALL
Single Cylinder Inverted Vertical
Built in Gainsborough, Lincolnshire c1900.
Cylinder 4 1/2" x 8" ~ Flywheel 3 Ft Dia.
Approx 56" High.
In unrestored condition. |
|
 F. PEARNS & Co.
Single Cylinder Inverted Vertical
A wall mounted engine made in Manchester c1900.
Cylinder 4" x 6".
Wt approx 100 Kg.
In unrestored condition.
Currently dismantled but complete. |
|
 RUSTON PROCTOR
Single Cylinder Inverted Vertical
2 H.P. "Improved Class V".
No. 17751 ~ Built 1893.
Cylinder 4" x 8" ~ Flywheel 30" Dia.
Height 58" (ex. governor).
A rare and very attractive vertical engine.
In good, original condition. |
|
 STUART TURNER
Single Cylinder Inverted Vertical
Cylinder 2" x 3" ~ Flywheel 4 1/2" Dia.
Built from castings c1940.
Wt approx 15 Kg.
A well made example, in good condition.
SOLD |
|
 F. SAVAGE
ORGAN ENGINE
Single Cylinder Inverted Vertical
No.655 ~ Built 1896 ~ Size No.3
Designed for driving a mechanical organ
on a steam powered fairground ride.
Cylinder 2 1/2" x 4" ~ Flywheel 15" Dia.
Cylinder lagging reads:
F.Savage & Co. Ltd, Engineers,
No.655, St Nicholas Iron Works, Kings Lynn.
In good, restored condition. |
|
 R. TIDMAN
ORGAN ENGINE
Single Cylinder Inverted Vertical
Designed for driving a mechanical organ
on a steam powered fairground ride.
By Robert Tidman & Co, Norwich, c1895.
Cylinder 2 1/2" x 4" ~ Flywheel 18" Dia.
Approx 36" High.
In good condition. |
|
 TANGYE & Co.
Single Cylinder Inverted Vertical
Workshop engine by Tangye, Birmingham, c1900.
Cylinder 5" x 10".
Wt approx 1000 KGs.
In unrestored condition. |
|
 TANGYE & Co.
Single Cylinder Inverted Vertical
Mill type engine by Tangye, Birmingham, c1900.
Cylinder 10" x 12".
Complete with attached pump.
9 Ft high ~ Wt approx 3500 KGs.
In unrestored condition. |
|
 WESTMINSTER
Single Cylinder Inverted Vertical
Built in the UK c1900.
Very attractive cast bottle type frame.
Cylinder 6" x 9". Wt approx 150 KGs.
68" High (inlcluding cly block shown removed.)
Currently dismantled but complete.
In good unrestored condition. |
|
 STEAM
LAWNMOWER
~ Power Plant ~
Combined boiler and single cylinder steam engine.
Believed marketed as a 'conversion' kit
for small lawnmowers in c1895.
Cylinder 2" x 3 1/2".
In good, original condition. |
|
 Barring Engine
Twin Cylinder Inverted Vertical
With declutchable reduction gear.
A powerful duplex engine designed for turning over (barring) very large stationary engines.
Cylinders 5" x 8" (approx).
Wt approx 750 Kg.
In good, original but unrestored condition. |
|
 STEVENSON
Barring Engine
Single Cylinder Inverted Vertical
with declutchable reduction gear.
Designed for turning over (barring) large stationary engines, this attractive open crank engine sits on a massive cast base featuring reduction gears and a Bendix declutching drive gear.
Cylinder 4" x 6" (approx).
Approx 50" High, Bed 32" Long x 21" Wide.
Wt approx 600 Kg.
In excellent restored condition. |
|
 EASTONS AMOS & ANDERSON
Steam Pumping Engine
Twin Cylinder Double Acting
~ Built in London 1870 ~
Designed to lift 50 tons of water per minute.
Built for land drainage in Norfolk.
Complete with original wooden
flushing gates and turbine pump.
In good condition. |
|
 EASTONS AMOS & SONS
Steam Pumping Engine
Twin Cylinder Double Acting
~ Built in London 1866 ~
Designed to lift 50 tons of water per minute.
Built for land drainage in Norfolk.
Complete with original wooden
flushing gates and turbine pump.
In good condition. |
|
~ Enclosed Type Engines ~
 TULLEY
Single Cylinder Horizontal
A small piston valve workshop engine.
'Agrimotor' Type ~ Size No. 2 (3" x 4" Cylinder).
For driving workshop machinery such as saws, etc.
Wt approx 100 Kg.
In good condition. |
|
 TULLEY
Single Cylinder Horizontal
A small piston valve workshop engine.
'Agrimotor' Type ~ Size No. 2 (3" x 4" Cylinder).
For driving workshop machinery such as saws, etc.
Wt approx 100 Kg.
In good unrestored condition. |
|
 TULLEY
Single Cylinder Horizontal
A small piston valve workshop engine.
'Agrimotor' Type ~ Size No. 2 (3" x 4" Cylinder).
For driving workshop machinery such as saws, etc.
Wt approx 100 Kg.
In unrestored condition. |
|
 CLARKSON
Generator Set Engine
A high speed enclosed vertical engine.
As used in London buses c1910.
Twin 1 3/4" x 2" Cylinders.
Pressure regulated steam valve.
Mounted on a cast aluminium baseplate.
~ Wt 30 Kg ~
In good, original condition. |
|
 STUART TURNER
Generator Set Engine
Single cylinder enclosed vertical engine, c1940's.
Designed to produce 800-1000 W @ 1000 r.p.m.
One of several currently available.
(with either piston or slide type valves.) |
|
 READER
Single Cylinder Vertical Engine
A very small, instructional type engine, built c1950.
Complete with RPM Counter.
Approx 4 H.P.
Wt approx 150 Kg.
In unrestored condition. |
|
 READER
Single Cylinder Vertical Engine
A general purpose high speed enclosed engine.
Approx 8-10 H.P.
Wt approx 600 Kg.
In good restored condition. |
|
 SISSONS
Generator Set Engine
A high speed enclosed type steam engine.
Suitable for direct coupling to a dynamo, etc.
Approx 8 H.P. Output |
|
 SISSONS
Generator Set Engine
A high speed enclosed type steam engine.
Suitable for direct coupling to a dynamo, etc.
Approx 10 H.P. |
|
 SISSONS
Generator Set Engine
A high speed enclosed type steam engine.
Suitable for direct coupling to a dynamo, etc.
Approx 10 H.P. |
|
 ROBEY
Single Cylinder Vertical Engine
Built c1930 ~ Wt approx 300 Kg.
In unrestored condition.
Approx 10 H.P. |
|
 EASTON JOHNSON
Single Cylinder Gen Set Engine
A high speed enclosed type steam engine
For direct coupling to a dynamo, etc.
Approx 12 H.P. Output. |
|
|
ASWHORTH PARKER
Single Cylinder Gen Set Engine
A high speed enclosed type steam engine.
For direct coupling to a dynamo, etc.
Approx 40 H.P. Output. |
|
ASHWORTH PARKER
Compound Generator Set Engine
A vertical compound high speed enclosed engine.
Suitable for coupling to approx 100 KW D.C. dynamo or alternator.
Approx 60 H.P. Output. |
|
 ALLEN
Compound Generator Set Engine
A vertical high speed enclosed steam engine.
Suitable for direct coupling to an alternator.
Approx 110 H.P. Output. |
|
~ Steam Turbines ~
 TURNEY
Steam Turbine
De Laval single stage steam turbine, approx 10 H.P.
Fitted with a Pickering governor.
Approx 24" dia. turbine.
Wt approx 100 Kg.
In very good, original condition. |
|
 VENT-AXIA
"TURBETTE"
Steam Turbine
De Laval single stage steam turbine, approx 5 H.P.
Approx 23" High x 23" Long.
Made by Vent-Axia, Rochester, Kent c1955.
A very rare small steam turbine complete with governor, etc. |
|
 Single Stage Turbine
De Laval type on steel base
Maker unknown..?
Approx 5 H.P.
Wt approx 90 Kg.
Dims 18" Wide x 28" Long (or 35" overall).
22" High Overall.
In good, original condition. |
|
 BELLISS & MORCOM
Multi-Stage Steam Turbine
3 Curtis rows/or Rateu stages.
Approx 60 H.P., at up to 8,000 r.p.m.
Dims: 28" Wide x 33" Long (or 44" inc valve).
Height 25" inc baseplate. Wt approx 100 Kg.
In good, original condition.
SOLD |
|
 J.P. HALL
Steam Turbine Driven Pump
No.4026 by J.P. Hall & Sons, Ltd Peterborough.
A marine type emergency condenser or fire pump.
Small multi stage steam turbine approx 20" dia.
With bronze centrifugal pump and attached governor
assembly, on cast base approx 28" x 23".
A rare high spec pump, in nice original condition. |
|
HATHORN DAVEY
